Home Assistant Core 2021.12.10 is now available

Release 2021.12.10 – January 17 has been released and should be available to update in your dashboard (Click Configuration, should be listed at the top of the screen).

The changes are:

• Avoid removing zwave_js devices for non-ready nodes (@kpine – #59964) (zwave_js docs)
• Convert siri requests for target heating cooling state auto to a valid mode (@bdraco – #60220) (homekit docs)
• dlna_dmr: Allow for upnp attributes with None contents (@chishm – #63892) (dlna_dmr docs)
• Convert disabled_by to DeviceEntryDisabler on load (@agners – #63944) (deconz docs) (picnic docs)
• Fix homekit options being mutated during config_flow/migration (@bdraco – #64003)
• Bump nexia to 0.9.13 to fix setting emergency heat (@bdraco – #64020) (nexia docs)
• Bump flux_led to 0.28.3 to fix setting colorloop on older models (@bdraco – #64094) (flux_led docs)
• Fix changing the preset mode (@bieniu – #64119) (shelly docs)
• Fix flux_led turn on when brightness is zero on newer devices (@bdraco – #64129) (flux_led docs)
• Ensure august status is current when integration loads (@bdraco – #64027) (august docs)
• Fix august lock/unlock with older bridges (@bdraco – #64143) (august docs)
• Ignore unavailable entities when creating zwave_js device actions list (@raman325 – #64184) (zwave_js docs)
• Fix KNX onboarding when there is no yaml config defined yet (@farmio – #64216) (knx docs)
• Bump bimmer_connected to 0.8.10 (@rikroe – #64314) (bmw_connected_drive docs)
• Ensure status is correct at start for older august bridges (@bdraco – #64144) (august docs)
• Bump flux_led to 0.28.4 to fix setting white temp on 0x35 devices (@bdraco – #64326) (flux_led docs)
• Orphaned MAC addresses breaks UniFi options flow (@Kane610 – #64327) (unifi docs)